24/03/2021
Firestone RubberCover is a high performing EPDM membrane, designed especially for the waterproofing of residential flat roof applications.
An attractive alternative to traditional felt roofing, EPDM rubber roofing membrane is unrivalled for its longevity and performance. The Firestone RubberCover EPDM, partnered with the range of accessories available at Roofbase is ideal for extensions, dormers, porches, garages, carports, garden sheds, outbuildings, balconies, gutters, and more.
The Firestone RubberCover EPDM is a 100% cured single-ply roofing membrane made of an Ethylene Propylene Diene Monomer. Its unique features and benefits can guarantee you that your Firestone RubberCover EPDM roofing installation is watertight and extremely durable.
For decades, Firestone EPDM rubber roofing membranes have been successfully installed on hundreds of thousands of large commercial and industrial roofs as well as covering domestic project worldwide.
Firestone RubberCover is available in large, seamless sheets up to 15.25m in width. Therefore, most residential roofs can be covered with one single sheet.
Firestone RubberCover offers unmatched resistance to ozone, UV radiation and high or low temperatures. The durable rubber membrane has a life expectancy of up to 50 years. What’s more, we offer a 20-year membrane warranty for your peace of mind.
Firestone RubberCover promotes a no flame installation, as the membrane is always adhered using cold-applied adhesives. This makes the flat roofing installation process easier, safer and more cost-effective than alternatives.
What’s more: once installed, Firestone RubberCover requires no or only little maintenance, combined with its resilience and speed of application this results in a very low overall lifecycle cost.
Elastomeric membrane with a good combination of high elasticity and tensile strength. Resistant to temperature shocks up to 130 degrees.
Used to mechanically fix the membrane on exposed edges, the raised profile is designed to keep water on the roof.
Used to mechanically fix the membrane on the gutter side and allow water to drain over.
Used for finishing 90° corners where two edge trims meet or edge trim meets gutter trim.
Used for finishing 90° internal corners where two edge trims meet.
Used for finishing 90° external corners where two gutter trims meet.
A non-flammable, water-based SBR adhesive specifically developed to bond polymeric roof membrane sheeting materials to timber roof surfaces.
A solvent-based contact adhesive designed specifically for bonding Firestone RubberCover to approved insulations in addition to wood, metal, masonry and other acceptable substrates.
Used in conjunction with all Quickseam products.
Used for joining two pieces of EPDM together with an overlap joint.
Used for joining two pieces of EPDM together when placed side by side or sealing to lead etc.
Used for weathering batten bars, lead or metal edge trims.
Used for detailing around pipes, skylights, external corners and other awkward details.
Firestone RubberCover EPDM – cut to length in your local branch or order by the roll.
We also stock a wide range of additional accessories, such as thermal insulation, fixings, clamps and much more – just contact your local branch for more details.
Join our mailing list
For product information, supplier updates and industry news direct to your inbox.
Tony Berriman - Berriman Roofing Specialists Ltd