Firestone RubberCover EPDM membrane is a 100% cured single roofing membrane made of a synthetic rubber Ethylene Terpolymer, therefore if you’re in need of RubberCover or RubbaTrim, make sure we’re your first port of call!

Firestone RubberCover EPDM Roofing System is the ideal solution for small residential flat roofs and other extensions, verandas, dormers, porches, garages, carports, garden sheds, balconies, gutters and trailers.


  • Superior durability
  • Seamless sheets in 1 piece
  • Flame-free and easy installation
  • Environmentally friendly
Watch installation video

Product Details

Substrates need to be clean, smooth, dry and free of sharp edges, loose or foreign materials, oil, grease and other materials that may damage the membrane. All surface voids greater than 5mm wide should be properly filled with an acceptable fill material.

The dimensions of the membrane are calculated to cover the substrate and possible upstands. Provide an additional length (150mm) at upstands for easy manipulation.

Elastomeric membrane with a good combination of high elasticity and tensile strength. Excellent resistance to UV and ozone. Retains its elasticity even at temperatures as low as -45°C. Resistant to temperature shocks up to 130°C. Excellent resistance to alkali rains, less resistant to oil products. Contact with mineral and vegetable oils, petroleum-based products, hot bitumen and grease must be avoided.

Don't just take our word for it...